Dienstag, 2. Oktober 2012

How you can help my Kickstarter campaign



Three things you can do:

- If you could publicly back me, by contributing 1$ that would be A-M-A-Z-I-N-G. I know many of you don't have any more extra money to spare than I do, however, this 1$ means a lot. It shows the world that you are publicly supporting me. Not only by sharing a link, but by contributing what (sadly) seems to be the one thing which counts in this world: $$$. Depending on where I go with this project, demonstrating that I have a broad supporter base may be extremely valuable to me.

- Please criticize what I am doing. Please find the flaws in my reasoning, the fallacies of my ideas. I will post them on the kickstarter page in order to start a discussion, to start discourse. I will learn from your criticism and other will learn from it. There is so much valid criticism to what I do... lots of my ideas are very problematic. I want people to point this out so it can be discussed and analyzed. Science is negotiation, our future is negotiation. The more standpoints we find, the richer my project can become.

- Finally, please share what I am doing. If you know somebody who is interested in this type of thing - tell them about my project. 

Prototype for my Kickstarter Campaign

Hi Everyone

as you might or might not know, I recently launched a kickstarter campaign in order to collect funding for my bachelor thesis. 

Check it out: http://www.kickstarter.com/projects/808216251/mediated-touch-a-telepresence-study

The money will go towards the hardware I require for running my experiment. Part of the hardware will be a humanoid robot with 4 DOF. In the following video you can see a rough prototype of the head, which will be the most complex moving part of the robot:


 
(I had to add music, as my flatmates complained that they did not want to be heard talking in the background. I find Estonian makes for beautiful background sounds... but then again - I have no idea what they where saying :-D....)


I built these prototypes with parts I had around the house. The brackets where freebies which I was presented with by John Iovine from Images Scientific Instruments quite some time ago. (Thanks again, btw!...) 

 *
Here are some pictures of the process:
... the servos and the brackets which I used for mounting them. I'm just getting started.


Continuing to assemble things...


The servos did not hold as tight as I wanted them to - in order to give the whole thing some additional strength I cut thin strips of thermoplastic, heated it up and then wrapped it tightly around the joint. I like this way of attaching things as its quite effortless but super, super stable.


 You also see that I used thermoplastic as shims (or washers? don't know that word. hat to google it). The screws I use are so tiny that finding fitting ones is quite a task - this is again, easyer and better.




Chassis is finished, and firmly mounted on two bottles filled with water for stability:

 


Anyway thats it for now. Lets see how this whole Kickstarter thing goes :-)

Samstag, 8. September 2012

Software Sketch for BerrieBase


I threw this together to get a feel of what our software could potentially look like.




This is similar to various data-flow languages (like vvvv, pd and Max/MSP) ...

 In theory I really liked data-flow languages, but I have never found an environment I was comfortable enough with to stick with. My plan with our software is to keep it simpler than the ones I just mentioned, and have the ability to switch over to code view, if you want to do something more complex. Basically I want to be able to generate flow-charts from code and code from flow-charts. I imagine every graphical node to be represented by a function. A newly declared variable would also be a node, and all other variables would be represented by lines.

This will of course require users to stick to a more functional style of programming than the relatively imperative way that is used with Arduino. Which could be a curse or a blessing. I am not sure which one yet.

Mittwoch, 29. August 2012

More Pictures of BerryBase Prototypes

Some more Pictures of our Hardware Prototypes:
The Base:
The shift registers which connect the base with the RaspberryPi

The first Berrie Modules :-)




Montag, 13. August 2012

BerryBase - What we have so far


 The Base



These two PCBs will merge into one. We have them separated now for debugging and as it was easier to design this way. The bottom PCB (the smaller one) connects to the RaspberryPi. The top PCB is stacked on top of that.

The top PCB provides us with connectors for 8 modules. Each module (or Berry) has a couple of digital inputs and outputs connecting to the RaspberryPi (for interrupts etc.) as well as SPI and I2C.



 The GPIOBerry



This is the most basic extension. It gives you 16 programmable logic pins.



 The AnalogBerry



This Berry gives you 8 24bit Analog Inputs. (Yes, 24Bit may be slightly overkill.)



The BrainBerry


We had to do it. Its an Arduino Clone. It is both a I2C Master and Slave, Acts as your standard Arduino, while staying in constant communication with the RaspberryPi. (I want 8 of these modules for programming my Evil Super AI)



The ButtonBerry / FeedbackBerry




We figure we will be using this guy a lot for debugging. It has 8 buttons paired with 8 green status LEDs.

Thats it for now. More to come :-)

p.

BerryBase - How it came about


Since I first heard about the RaspberryPi, I was fascinated by the little computer. Once the final specs however came out, I realized that I did not really know what I would use it for. It seemed under-powered for the computer-vision application I originally had in mind. I considered using it as a microcontroller, but I soon realized that in most cases I would be better off using an Arduino instead.

I soon realized, that adding some basic circuitry might improve the situation. I also wanted to add a case. My idea was, that it would be cool to simply increase the number of I/O pins, as well as add some analog inputs. Additionally I wanted to be able to source significantly more power over the individual pins. I discussed this at length with my friend Michael Harst, but it stayed a simple idea.

First Prototype

I ended up meeting Yann Leretaille, Torben Friehe, Mathias Hemmerle & Alex Hannemann. Together we created the first prototype. It was Yann who also suggested "Everything should be Plug & Play". I thought he was crazy.

Somehow Yann and I however felt our original design restricting. We where especially unhappy with how we where handling the SPI and I2C ports. (Basically we where ignoring them). Eventuelly we started experimenting with ways of extending the SPI and I2C ports. While doing so we realized that we might as well create a modular system - we thought that the design would not be significantly more complex (we where wrong). And all of a sudden Yann's "Plug & Play" Idea no longer seemed crazy, once we restricted the Plug & Play functions to the modules we designed.

Sonntag, 12. August 2012

BerryBase PCBs

I am currently working on extension for the RaspberryPi.

Info will soon go online at www.berrybase.cc I just got this image sent from iteadstudio.

Am super psyched